Skip to main content

Jenny LCD 3D Printer Resin FAQs


1. Resin Viscosity gets higher, and will this affect the printing?
   Exploding in UV or sunlight; ambient temperature becomes low; or stock resin in a room the air conditioner working. All these will lead to viscosity become higher. Please store and print between 20-30 degrees C.



2. There are white residue on resin models after post curing
   The resin residues are not cleaned well.
    The alcohol purity is not enough or cleaned by water. Please clean resin model by ≥95% alcohol and make sure the residue are cleaned.
    Please dry up resin models with lint free wiper or hair conditioner.



3. Resin models get soft and distortion
   Cleaning time is too long. We suggest cleaning with ≥95% alcohol within 60s.
   Please dry the resin model and post cuing by UV chamber or sunlight.
   sure every side of the model is cured until model is dry and strong enough.

4. There are breaks or holes on resin models at same XY axis position.
   First, check if there are on the release film or LCD screen. If no, please check the LCD screen.

5. Obvious layer mark on resin models.
  Defective Z axis lead screw or the screw is loose.

6. stocked small holes , bad details, no sharp angles, the print is bigger than 3d model.
The cuing time is too long. Shorten curing time for each layer.

Notice:
Water washable 3d printing resin is cleaned by water.


Light1+LCD 3D Printer

Light 2 mini LCD 3D Printer


Light 2 LCD 3D Printer
Unversial 3D Printing Resin
JW19 Water Washable 3D Printing Resin


Comments

Post a Comment

Popular posts from this blog

Revolutionary LCD UV Resin 3D printer

              Jenny LCD-3D-Printer     Meet our NEW generation: LCD UV resin 3D printer---Light 1+. This is the latest 3D printing technology after SLA and DLP.       Light 1+ 3d printer use UV light to cure the UV resin layer by layer with high accuracy, and the print speed is much faster than filament printers. Instead of filaments, UV resin enables the prints smoother and much accurate than ever. Here is the technical data for light 1+:        LCD offers constant high speed and precision regardless of how much of the workspace is in use. The print speed is only based on the  height of the 3D model  and the curing time of the resin type. This enables us to print a lot little models the same time, or one big model. LCD highly expand the use of Jewelry design.  Rings, necklaces, bracelets, earrings and other jewelry requires an immense precision a good resin 3D printer can offer. And o...
Post a Comment
Read more

Jennybox Version 2.3 launching Notice

Jennybox Version 2.3 launching Notice Jennybox 1. Remote access by NAT traversal Realize the access to visit any devices by LAN anywhere only if you can surf on internet. Please check 《 Jenny LCD 3D printer remote visiting by WAN user guide 》 for reference. 2. Use USB flask disk to set Wi-Fi connection If you have no wired network, you need to sign-in and connect to Wi-Fi. Please check 《 Jenny LCD 3D printer wireless user guide 》 for reference. 3. Auto updating for touch screen display UI For better performance, we update the UI (user interface). The updates enable the UI automatically refreshing after users download the Binary files (BIN). Please check 《 Jenny LCD 3D printer touch screen auto-updating guide 》 for reference. 4. LCD panel replacement set Since we update 5.5, 6.33 and 8.9 inch panels, you could change panels by Jennybox based on your needs. This update will work after reboot the printer. 5. Solve the problem that LCD panel has charact...
1 comment
Read more
    Along with the widely use of LCD 3D printers, people meet a post  processing problem: how could we make the printed objects more stable, strength and won't fade away with time-the post cuing process.    Most users may use UV light or other similar way. But there are some technical issues we need to notice. First, only 405nm UV light source can get best curing performance. Second, you need UV light shines every angles for complicate objects. Third, UV light is not safe for human body. people can not explode in UV light, or we need to cover the UV light up.  Then the post cuing box is appear.  Post curing box is stragetically placed 405nm UV light beads around the 5 sides of the box. Only 2 minutes curing enhance your 3D prints for max stability and strength, and keep the color as fresh and new as first. The box is full covered when it works, no harm for human body, no worry for you and your family.  Set the curing time and you can ...
Post a Comment
Read more