How to clean up the resin model

1. Remove resin model from build plate with spatulas. Please wait the remaining liquid resin drop down.

2. Wash the resin model with 95% purity alcohol.

3. Wash the resin model again with 95% purity alcohol in new container. Use brush to clean the resin off. Use alcohol spraying bottle clean the small instructions. Wash the model again until it's clean.

4. Dry up the resin model with lint free wiper and hair conditioner.

Tips: If the model is difficult to remove with spatulas. You can try softening the build layers with hair conditioner.

5. Please post curing the resin model immediately by cuing chamber or sunlight. Make sure every side is shined until whole model is dry and strong enough. Post curing can enable the model with better physical and mechanical properties.

This is Mandy from Jennyprint. That's all for today!

Email me if you any questions: mandy@jennyprint.com

For more information:

Facebook: https://www.facebook.com/mandy.wang.12720100

Instagram: https://www.instagram.com/jennyprinter/

Twitter: https://twitter.com/Mandy95978738

Comments

Jennybox Version 2.3 launching Notice

Jennybox Version 2.3 launching Notice Jennybox 1. Remote access by NAT traversal Realize the access to visit any devices by LAN anywhere only if you can surf on internet. Please check 《 Jenny LCD 3D printer remote visiting by WAN user guide 》 for reference. 2. Use USB flask disk to set Wi-Fi connection If you have no wired network, you need to sign-in and connect to Wi-Fi. Please check 《 Jenny LCD 3D printer wireless user guide 》 for reference. 3. Auto updating for touch screen display UI For better performance, we update the UI (user interface). The updates enable the UI automatically refreshing after users download the Binary files (BIN). Please check 《 Jenny LCD 3D printer touch screen auto-updating guide 》 for reference. 4. LCD panel replacement set Since we update 5.5, 6.33 and 8.9 inch panels, you could change panels by Jennybox based on your needs. This update will work after reboot the printer. 5. Solve the problem that LCD panel has charact...

FDM 3D Printer FAQs 1. No extruding when print starts R1. Extruder not well prepared before printing Most extruders will leak when they are travel at high temperature. The filament is about to leak and this will lead to an empty part inside the nozzle. This empty part may occur during you first pre heating the extruder or extruder cooling down. If extruder loss some filament, it needs a few seconds for filament extruding. So we must take care of the delay before we start printing. You can add skirt in Cura (Simplify3d has same function too). The skirt will print a circle first. This enables the extruder fulfilled with filament. If you need extra filament, you could add skirt numbers. Someone likes to pre-extrude with touch screen. R2. Nozzle too close to print bed Nozzle will be stocked by printed bed if too close. The first few layers not bu...

Revolutionary LCD UV Resin 3D printer

Jenny LCD-3D-Printer Meet our NEW generation: LCD UV resin 3D printer---Light 1+. This is the latest 3D printing technology after SLA and DLP. Light 1+ 3d printer use UV light to cure the UV resin layer by layer with high accuracy, and the print speed is much faster than filament printers. Instead of filaments, UV resin enables the prints smoother and much accurate than ever. Here is the technical data for light 1+: LCD offers constant high speed and precision regardless of how much of the workspace is in use. The print speed is only based on the height of the 3D model and the curing time of the resin type. This enables us to print a lot little models the same time, or one big model. LCD highly expand the use of Jewelry design. Rings, necklaces, bracelets, earrings and other jewelry requires an immense precision a good resin 3D printer can offer. And o...

Jenny 3D printer

Search This Blog