Skip to main content

Jennybox Version 2.3 launching Notice


Jennybox Version 2.3 launching Notice

Jennybox

1. Remote access by NAT traversal
Realize the access to visit any devices by LAN anywhere only if you can surf on internet. Please check 《Jenny LCD 3D printer remote visiting by WAN user guide》for reference.

2. Use USB flask disk to set Wi-Fi connection
If you have no wired network, you need to sign-in and connect to Wi-Fi. Please check 《Jenny LCD 3D printer wireless user guide》 for reference.

3. Auto updating for touch screen display UI
For better performance, we update the UI (user interface). The updates enable the UI automatically refreshing after users download the Binary files (BIN). Please check 《Jenny LCD 3D printer touch screen auto-updating guide》 for reference.

4. LCD panel replacement set
Since we update 5.5, 6.33 and 8.9 inch panels, you could change panels by Jennybox based on your needs. This update will work after reboot the printer.

5. Solve the problem that LCD panel has characters.

6. Add new configuration for tested resins
Soft resin (TPU), casting resin, dental modeling resin, rigid resin.

Printer updates for Version 2.3
1. Auto-filling, please check《Jenny LCD 3D printer auto-filling guide》for reference

2. Sectional uplift & descend
Please check《Jenny LCD 3D printer sectional uplift & descend user guide》 for reference.

More information
For more needs and questions, please email: yzy@jennyprint.com

Mirror site: https://pan.baidu.com/s/18qR0IKxn0BguPJWw74NTog   access code: la30

Panel UI: https://pan.baidu.com/s/1-WqlPJt3fB-EdxbsBhqnBQ  access code: nta4

Updates: http://www.jennyprint.com/hot/?/article/48

Comments

  1. UnknownApril 4, 2021 at 4:59 AM

    Can you please share the Jennylight nanodlp and the ui touchscreen files ?

    ReplyDelete

Post a Comment

Popular posts from this blog

FDM 3D Printer FAQs  1.        No extruding when print starts R1. Extruder not well prepared before printing        Most extruders will leak when they are travel at high temperature. The filament is about to leak and this will lead to an empty part inside the nozzle. This empty part may occur during you first pre heating the extruder or extruder cooling down. If extruder loss some filament, it needs a few seconds for filament extruding. So we must take care of the delay before we start printing. You can add skirt in Cura (Simplify3d has same function too). The skirt will print a circle first. This enables the extruder fulfilled with filament. If you need extra filament, you could add skirt numbers. Someone likes to pre-extrude with touch screen. R2.  Nozzle too close to print bed          Nozzle will be stocked by printed bed if too close. The first few layers not bu...
2 comments
Read more

Revolutionary LCD UV Resin 3D printer

              Jenny LCD-3D-Printer     Meet our NEW generation: LCD UV resin 3D printer---Light 1+. This is the latest 3D printing technology after SLA and DLP.       Light 1+ 3d printer use UV light to cure the UV resin layer by layer with high accuracy, and the print speed is much faster than filament printers. Instead of filaments, UV resin enables the prints smoother and much accurate than ever. Here is the technical data for light 1+:        LCD offers constant high speed and precision regardless of how much of the workspace is in use. The print speed is only based on the  height of the 3D model  and the curing time of the resin type. This enables us to print a lot little models the same time, or one big model. LCD highly expand the use of Jewelry design.  Rings, necklaces, bracelets, earrings and other jewelry requires an immense precision a good resin 3D printer can offer. And o...
Post a Comment
Read more